Stab Stand - MonoPod - Picatinny Rail Mount
...3D printed MonoPod for rear point of contact when spending time on the range. Provides a height adjustable 3rd contact to help stabilize your platform and potentially improve consistency.
Mounts up to all picatinny style rails. Can be folded up out of the way for every day use, or dropped down for a day at the range.
Approximate height from picatinny rail to bench/table, when in down position, is roughly 4.5" to over 6". If looking for a different size, please message thru Pricetronic for potentially custom work.
Simply attach to the picatinny rails using provided hardware (tighten to 18 in-lbs), unscrew the leg and locking nuts to allow MonoPod bolt to swing to upright and/or down mounting location, and tighten up the jam nuts for a secure/stable MonoPod.
When the MonoPod is in the upright/storage position, as well as in the down/range position, the bolt head drops into a tight fitting chamber to help hold it in place (screwing the jam nuts down tight will draw the bolt head into position for a secure mount).
When you'd like to change position of the MonoPod, to either the upright or down position, after loosening the jam nuts, you may have to give the leg a slight pop back toward the MonoPod body - inline with the bolt, to allow the bolt head to clear the tight chamber and slide to the second position. May have to loosen the jam nut a bit more if the first "slight pop" didn't allow the bolt to move freely.
Polymer 3D printed mount (PLA +)... Designed and made in the USA (Wisconsin)
...Modeled independently from other 3D printed designs/options currently available.
This MonoPod setup weighs less than 6oz
while being remarkably durable...but it is a budget friendly 3D printed MonoPod
, and not a machined aluminum/steel unit - although it can be used on wide array of calibers, not restricted to airsoft.
Shipped with USPS First Class Package in CONUS... Monopod - Mono Pod - Bipod - Bi Pod - Accu - Precision - Polymer - Printed - Bench - Target
...3D printed MonoPod for rear point of contact when spending time on the range. Provides a height adjustable 3rd contact to help stabilize your platform and potentially improve consistency.
Mounts up to all picatinny style rails. Can be folded up out of the way for every day use, or dropped down for a day at the range.
Approximate height from picatinny rail to bench/table, when in down position, is roughly 4.5" to over 6". If looking for a different size, please message thru Pricetronic for potentially custom work.
Simply attach to the picatinny rails using provided hardware (tighten to 18 in-lbs), unscrew the leg and locking nuts to allow MonoPod bolt to swing to upright and/or down mounting location, and tighten up the jam nuts for a secure/stable MonoPod.
When the MonoPod is in the upright/storage position, as well as in the down/range position, the bolt head drops into a tight fitting chamber to help hold it in place (screwing the jam nuts down tight will draw the bolt head into position for a secure mount).
When you'd like to change position of the MonoPod, to either the upright or down position, after loosening the jam nuts, you may have to give the leg a slight pop back toward the MonoPod body - inline with the bolt, to allow the bolt head to clear the tight chamber and slide to the second position. May have to loosen the jam nut a bit more if the first "slight pop" didn't allow the bolt to move freely.
Polymer 3D printed mount (PLA +)... Designed and made in the USA (Wisconsin)
...Modeled independently from other 3D printed designs/options currently available.
This MonoPod setup weighs less than 6oz
while being remarkably durable...but it is a budget friendly 3D printed MonoPod
, and not a machined aluminum/steel unit - although it can be used on wide array of calibers, not restricted to airsoft.
Shipped with USPS First Class Package in CONUS... Monopod - Mono Pod - Bipod - Bi Pod - Accu - Precision - Polymer - Printed - Bench - Target