INCLUDES: 2 8800mah RECHARGEABLE 26650 BATTERIES 1 DUAL SLOT SMART BATTERY CHARGER (Charges All Round Li-ion & Li-po Batteries) (With Overcharge Circuit Protection) CHARGERS HAVE BEEN QUALITY TESTED 8800mah RECHARGEABLE 26650 BATTERY FITS THE GENUINE SHADOWHAWK X800 TACTICAL FLASHLIGHT. ****FAST SAME DAY SHIPPING FROM OHIO**** Due to supply issues we sometimes ship Skywolfeye 8000mah Batteries, or 2 single chargers. Flashlight is not included. UNITED STATE POSTAL SERVICE LITHIUM BATTERIES SHIPPING REGULATIONS:
For domestic mailings only, small consumer-type lithium metal cells or batteries (also called primary lithium cells or batteries) like those used to power cameras and flashlights are mailable domestically under the following conditions. See 622 or IMM 136 when mailing batteries internationally or to APO/FPO/DPO destinations.
General. The following restrictions apply to the mailability of all lithium metal (or lithium alloy) cells and batteries:
Each cell must contain no more than 1.0 gram (g) of lithium content per cell.
Each battery must contain no more than 2.0 g aggregate lithium content per battery.
Each cell or battery must meet the requirements of each test in the UN Manual of Tests and Criteria, part III, and subsection 38.3 as referenced in DOT’s hazardous materials regulation at 49 CFR 171.7.
All outer packages must have a complete delivery and return address.
All packaging must meet applicable requirements specified in 49 CFR 173.185. Except for mailpieces containing button cell batteries properly installed in the equipment they are intended to operate, mailpieces containing lithium metal batteries must be rigid, sealed, and of adequate size, so the mark can be affixed to the address side without the mark being folded. The use of padded and poly bags as outer packaging is permitted only when the mailpieces contain button cell batteries meeting the classification criteria in 349.11d, the batteries are properly installed in the equipment they are intended to operate, and the batteries are afforded adequate protection by that equipment.
Except for mailpieces containing button cell batteries installed in equipment (including circuit boards), or no more than 4 lithium metal cells or 2 lithium metal batteries installed in the equipment they operate, mailpieces containing lithium metal batteries must bear a DOT-approved lithium battery mark, as specified in 49 CFR 173.185(c)(3)(i) and Exhibit 325.2a, applied to the address side of the mailpiece. Marks must not be applied in such a manner that parts of the mark appear on different sides of the mailpiece.
The mark must indicate UN3090 for lithium metal cells or batteries. UN3091 must be indicated where the lithium cells or batteries are contained in or packed with the equipment they are intended to operate. The mark must also include a telephone number for those who need to obtain additional information.
For domestic mailings only, small consumer-type lithium metal cells or batteries (also called primary lithium cells or batteries) like those used to power cameras and flashlights are mailable domestically under the following conditions. See 622 or IMM 136 when mailing batteries internationally or to APO/FPO/DPO destinations.
General. The following restrictions apply to the mailability of all lithium metal (or lithium alloy) cells and batteries:
Each cell must contain no more than 1.0 gram (g) of lithium content per cell.
Each battery must contain no more than 2.0 g aggregate lithium content per battery.
Each cell or battery must meet the requirements of each test in the UN Manual of Tests and Criteria, part III, and subsection 38.3 as referenced in DOT’s hazardous materials regulation at 49 CFR 171.7.
All outer packages must have a complete delivery and return address.
All packaging must meet applicable requirements specified in 49 CFR 173.185. Except for mailpieces containing button cell batteries properly installed in the equipment they are intended to operate, mailpieces containing lithium metal batteries must be rigid, sealed, and of adequate size, so the mark can be affixed to the address side without the mark being folded. The use of padded and poly bags as outer packaging is permitted only when the mailpieces contain button cell batteries meeting the classification criteria in 349.11d, the batteries are properly installed in the equipment they are intended to operate, and the batteries are afforded adequate protection by that equipment.
Except for mailpieces containing button cell batteries installed in equipment (including circuit boards), or no more than 4 lithium metal cells or 2 lithium metal batteries installed in the equipment they operate, mailpieces containing lithium metal batteries must bear a DOT-approved lithium battery mark, as specified in 49 CFR 173.185(c)(3)(i) and Exhibit 325.2a, applied to the address side of the mailpiece. Marks must not be applied in such a manner that parts of the mark appear on different sides of the mailpiece.
The mark must indicate UN3090 for lithium metal cells or batteries. UN3091 must be indicated where the lithium cells or batteries are contained in or packed with the equipment they are intended to operate. The mark must also include a telephone number for those who need to obtain additional information.